What is Zirconium Silicide ZrSi2 Powder?
Prices in the national electricity market averaged $87 per megawatt-hour in the first three months of the year, above the level promised by the federal government. Wholesale electricity prices for industry and large businesses have already exceeded the level promised by the federal government, adding another cost pressure to the economy. Prices in the national electricity market averaged $87 per megawatt-hour in the first three months of this year, up more than two-thirds from the December 2021 quarter, the Australian Energy Market Operator (AEMO) said recently. That's up 141% from the March 2021 quarter.
Because of the ever-changing international situation, the supply and prices of international bulk Zirconium Silicide ZrSi2 Powder are still very uncertain.
Introduction to Zirconium Silicide ZrSi2 Powder
Zirconium silicide or zirconium disilicide, chemical formula ZrSi2, is a steel gray rhombic glossy crystal, the relative density is 4.8822. Zirconium silicide is insoluble in water, inorganic acid, and aqua regia, but soluble in hydrofluoric acid.
Physicochemical Properties of Zirconium Silicide ZrSi2 Powder
ZrSi2 as a zirconium-silicon intermetallic compound is a kind of ceramic material with high hardness, high melting point, high conductivity, high heat conductivity, and good thermal shock resistance to high temperature. Given the silicon zirconium - intermetallic compound has superior physical and chemical properties, ZrSi2 is a kind of structural material or new engineering material which can be used as the high-temperature corrosive medium.
|Zirconium Silicide ZrSi2 Powder Properties
||zirconium(IV) silicide, zirconium disilicide, ZrSi2 powder
||gray black powder
|Solubility in H2O
Zirconium Silicide ZrSi2 Powder CAS 12039-90-6
Preparing Methods of Zirconium Silicide ZrSi2 Powder
Zirconium silicide can be obtained from a mixture of zirconium powder and silicon powder at high temperatures under air isolation.
A method for preparing zirconium silicide nanomaterial comprises the following steps:
1. Add 5mmol zirconia, 5mmol silicon powder, and 50mmol lithium metal into a 20ml stainless steel autoclave and seal it. Then put the autoclave into an electric furnace capable of temperature programmed, set the heating rate of the furnace to 10℃ per minute, and heat the furnace to 600℃. The reaction is cooled naturally to room temperature and the autoclave is opened to remove the product which is black sediment.
2. The reaction products were washed with distilled water, then respectively with dilute hydrochloric acid and anhydrous ethanol washing each time, after washing the product of the filter, then 60 ℃ in the vacuum drying oven drying 4 hours get zirconium silicide nanomaterials, based on the preparation of zirconium silicide nanomaterial quality and the quality of the raw material of zirconium dioxide used, it is concluded that the yield of zirconium silicide was 85%.
Applications of Zirconium Silicide ZrSi2 Powder
ZrSi2 can be used as fine ceramic raw material powder to make crucibles or semiconductor film.
Applications of Zr Zirconium
One of the most important applications of zircon is in the production of white pigment impervious agents for surface glazes and pigments in the tile and ceramic industries. Refractory applications are also a common use of zircon in the manufacture of firebricks and shapes used in the steel and glass industries. Due to its high melting point (2200℃), zircalite is used as casting sand for molds and as "flour" for grinding, especially in warmer applications where it is important to maintain the surface quality of castings. The area of expertise known as "investment casting" is the growing use of zircon in the industry. Zirconium is also used in the production of zirconia, zirconium metals, and zirconium chemicals.
Main Supplier of Zirconium Silicide ZrSi2 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality zirconium silicide ZrSi2 powder, please feel free to contact us and send an inquiry. ([email protected])
The Zirconium Silicide ZrSi2 Powder industry has experienced demand expectations driven by the rise and the off-season tired stock driven by the seasonal decline in two rounds of the market. Affected by the COVID-19 epidemic and other factors, inventories of manufacturers continue to accumulate, putting pressure on market sentiment. In addition to off-season factors, the weak trend of Zirconium Silicide ZrSi2 Powder also reflects the market's concern about the epidemic and some other related enterprises' financial situation.